Подключаем и настраиваем DJI O3 Air Unit
Привет бро! Щас покажу что надо делать с новым DJI O3 Air Unit.
Подключение
Тут есть один нюанс, когда мы подключали DJI Air Unit или RunCam Vista то использовали только четыре провода:
- Питание (7.4 – 26.4 М);
- Земля (GND)
- TX
- RX
И у нас все работало отлично. Но в случаи с DJI O3 Air Unit нам понадобиться все шесть проводов. Да ты можешь подключить только четыре провода как раньше, но тогда O3 всегда будет в режиме пит-стопа (на минимальной мощности), даже после арминга.
Решается это очень просто: пятый провод ты паяешь на свободный GND, а шестой на RX1 вместе с приемником. То есть получается, что TX приемника и шестой провод юнита (SBUS) паяются на один RX и проблема уходит.
Но если у тебя полетник MAMBA то, с ним проблем не будет, так как у всех полетников Diatone MAMBA есть разъем под юнит.
Активация DJI O3 Air Unit
Для активации тебе надо скачать DJI Assistant 2 (Consumer Drones Series), обрати внимание что это не DJI Assistant 2 (DJI FPV series). Если ты воспользуешься ассистентом DJI FPV series, у тебя ничего не получиться. Тебе нужен именно Consumer Drones Series.
Так же тебе не надо подключать юник к дрону и подавать питание, достаточно просто подключить юнит к компьютеру через USB Type – C.
Активация завершена. Теперь обновим прошивку юнита.
Обновление DJI O3 Air Unit
Если обновление не получилось, то попробуй все тоже самое, но через VPN.
FCC Hack для DJI O3 Air Unit не нужен. Хак ставиться на очки, но не на модуль, но об этом в другом посте.
Dji air unit что это такое
1/1.7-inch Sensor, 12.7mm Equivalent Focal Length, f/2.8 Aperture
The DJI O3 Air Unit features upgraded imaging specs across the board. The air unit camera module is equipped with 20 GB of built-in storage as well as a 1/1.7-inch sensor to present richer details and high-quality imagery. It supports 4K/120fps video and shoots 155° super-wide FOV footage for stunning visual effects. [8] In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to more flexibly edit and adjust your footage.
Elevate Your Creations
The O3 Air Unit camera module can be used with the DJI Avata ND Filters Set (ND8/16/32). [9] Made of high-quality materials, the ND filters present true color details and light-dark contrast, providing flexible aperture control and exposure selection.
Fine Tune Your Experience
The DJI O3 Air Unit supports Canvas mode, allowing you to customize the on-screen display information of your DJI Goggles 2 or DJI FPV Goggles V2. Adjust the PID parameters and set up the system to suit your style.
Packed with Power
The DJI O3 Air Unit offers vast compatibility in a lightweight and compact body for flexible combinations and assembly. When used with DJI Goggles 2 and DJI FPV Remote Controller 2, you can enjoy complete mobility. [10]
Air Unit Weight (camera module included) [11]
Air Unit Dimensions [11]
Camera Module Dimensions [11]
Compatible with Multiple DJI Devices
Enjoy next-level comfort and convenience with DJI Goggles 2. Now smaller, lighter, and equipped with Micro-OLED screens so you experience outstanding clarity as you navigate the sky.
DJI FPV Goggles V2
Featuring DJI O3 image transmission for high-definition, low-latency, long-distance transmission, and strong anti-interference capabilities.
DJI FPV Remote Controller 2
The ultra-low-latency remote features Hall effect control sticks with an ergonomic design to offer high-accuracy control. Unlock M Mode to fly with freedom and achieve more advanced maneuvers.
Go the Distance
- 30 ms 10 km Digital Video Transmission
- 1080p/100fps H.265 Video Transmission
- 4K/120fps Video
- 155° Super-Wide FOV
* When recording with a high resolution and high frame rate, the product may overheat and stop recording due to the relatively high power consumption. If this occurs, please return and land in time to cool down. Additionally, please take effective heat dissipation measures and avoid blocking ventilation holes.
1. The 155° FOV is only available when the aspect ratio is 4:3 and the video recording specification is 2.7K@30/50/60/100/120fps, or 1080p@30/50/60/100/120fps ; or when the aspect ratio is 16:9 and the video recording specification is 4K@30/50/60/100/120fps, 2.7K@30/50/60/100/120fps,or 1080p@30/50/60/100/120fps.
2. Compatible with DJI Goggles 2, DJI FPV Goggles V2, and DJI FPV Remote Controller 2, which are sold separately.
3. Using DJI Goggles 2 and tested in an outdoor open environment free of interference.
4. FCC-compliant and tested in an outdoor open environment free of interference.
5. Tested in an outdoor open environment free of interference. Video transmission latency data varies with different goggles. With DJI Goggles 2 at 1080p/100fps video transmission quality, the lowest video transmission latency is 30 ms. With DJI FPV Goggles V2 at 810p/120fps video transmission quality, video transmission latency is less than 28 ms.
6. Tested in an outdoor open environment free of interference. Video transmission bitrate varies depending on the operating environment.
7. Some countries or regions do not support 5.8 GHz. Please check, confirm, and strictly abide by local laws and regulations before use.
8. 4K/120fps videos do not support the aspect ratio of 4:3 and only support that of 16:9.
9. Sold separately.
10. Compared with DJI FPV Goggles V2 and DJI FPV Remote Controller.
11. The size and weight may be slightly different due to the configuration, manufacturing process, and measurement method.
Представляем DJI O3 O3 Air Unit
И вот это произошло компания DJI представила долгожданный для всех пилотов модуль O3 Air Unit.
Блок O3 обеспечивает невероятно надежную и качественную передачу изображения с низким временем задержки и высоким разрешением в компактном размере, чтобы раскрыть безграничные воздушные возможности для пилотов.
Сегодня 22 ноября 2022 компания DJI представила модуль O3 Air Unit. Это компактная и легкая система состоящая из FPV-камеры и модуля передачи, которая обеспечивает невероятно надежное и надежное изображение, позволяющее пользователям достичь новых высот своего захватывающего полета. 1/1,7-дюймовый сенсор камеры обеспечивает видео с разрешением до 4K/60 кадров в секунду со сверхшироким углом зрения 155°, обеспечивая при этом прямую трансляцию 1080p/100 кадров в секунду на расстоянии до 10 км с задержкой всего 30 мс. Благодаря этим и многим другим функциям DJI O3 Air Unit является идеальным дополнением к высокопроизводительным FPV систмам.
Флагманская система передачи видео
Основой любой системы FPV является передача, поэтому воздушный блок O3 поставляется с первоклассной системой DJI O3+. Всенаправленные антенны 2T2R, встроенные в воздушный блок, обеспечивают 1080p/100fps
Передача видео H.265 с максимальным битрейтом 50 Мбит/с. Чтобы облегчить пользователям полет, видео передается на расстояние до 10 км, а задержка составляет всего 30 мс. Если окажется то некоторые частоты заняты модуль O3 Air Unit автоматически выбирает наилучшую частоту и использует технологии защиты от помех, чтобы поддерживать надежную связь с пилотом.
Качество изображения, готовое к просмотру контента
Камера O3 Air Unit была создана специально для того, чтобы пользователи могли испытать и записывать полет, как никогда раньше. В модуле камеры находится 1/1,7-дюймовый сенсор, который снимает видео со скоростью до 4K/60 кадров в секунду при сверхшироком угле зрения 155°. Видео можно снимать в цветовом режиме D-Cinelike, что позволяет добиваться потрясающих визуальных результатов после цветокоррекции и постобработки. Камера также совместима с набором фильтров DJI Avata ND для обеспечения идеальной записи при любых условиях освещения.
Настраиваемость и совместимость
DJI понимает, что энтузиасты FPV имеют уникальные предпочтения, когда речь идет об иммерсивном опыте, поэтому воздушный блок O3 был разработан соответствующим образом. Режим холста позволяет настраивать экранное меню, гарантируя, что пилоты увидят именно то экранное меню, которое им подходит. Для дополнительных возможностей просмотра и управления Air Unit совместим с очками DJI Goggles 2, DJI FPV Goggles V2 и DJI FPV Remote Controller 2.
Пробудитесь с DJI Goggles 2
После дебюта в DJI Avata Pro-View Combo очки DJI Goggles 2 теперь доступны в отдельной версии. Он использует передачу DJI O3+ с задержкой всего 30 мс, обеспечивая четкое изображение 1080p на экранах Micro-OLED. Его первоклассные характеристики дополняются мягкой сменной прокладкой из пеноматериала, уменьшающей засветы, и технологией SyncSmooth для более плавной прямой трансляции, снижающей зрительное утомление. Встроенные диоптрии регулируются в диапазоне от +2,0 до -8,0, чтобы пользователи с корректирующими линзами могли летать без очков. Очки DJI Goggles 2 совместимы с воздушным блоком DJI O3, DJI Avata и пультом дистанционного управления DJI FPV 2.
Дополнительные функции
- Передача видео со сверхнизкой задержкой на скорости менее 28 мс.
- Плавность передачи с помощью флагманского алгоритма, повышающего плавность прямых трансляций и минимальную задержку.
- 48-мегапиксельный сенсор для превосходных изображений высокой четкости.
- Диафрагма f/2.8 для превосходной глубины резкости.
- Замедленное видео 2,7K/120 кадров в секунду для драматичного монтажа.
- Легкий и компактный , как и его предшественник DJI Digital FPV System, для простой установки.
- Поддержка RockSteady для создания еще более плавных кадров.
- Открытые данные IMU обеспечивают удобное постредактирование и стабилизацию.
- Режим чтения карт через USB-соединение для быстрого чтения файлов.
- 20 ГБ встроенной памяти в модуле передачи.
Цена и доступность
Воздушный блок DJI O3 доступен для предзаказа и включает в себя модуль камеры, модуль передачи, антенну и кабель 3-в-1.
Для простоты установки и решения распространенных проблем компания DJI представила вам онлайн руководство по установке воздушного блока DJI O3.
New DJI O3 Air Unit is amazing, right? Yes, it is, but…
DJI has released the much-anticipated O3 Air Unit with somewhat mixed results. The new O3 Air comes with a 1/1.7″ CMOS sensor capable of 4K at 60 fps recording in camera and 1080p at 100 fps transmitted to the goggles with latency as low as 30 ms.
Features of the DJI O3 Air Unit include built-in Rock Steady, 20GB of internal storage, card reader mode, and 2.7K at 120fps.
The new air unit is now available on DJI’s website at $229 and includes the camera, transmission module, antenna, and 3-in-1 cable.
The new Air Unit is compatible with both the DJI FPV Goggles 2 and the DJI Goggles 2. In our test and review, we used the DJI Goggles 2 exclusively with our DJI O3 Air Unit.
Built-in and adjustable diopters make the new goggles a go-to for anyone who wears glasses. And better yet, the DJI Goggles 2 are now available in a stand-alone package (without the motion controller). At $649, the DJI Goggles 2 include a battery, frames, screen protector, headband, and antennas.
DJI O3 Air Unit, our first impressions
Our first impressions of the air unit were honestly very poor. Shaky camera footage, overheating, and poor transmission left much to be desired. However, we performed our torture tests for the unit first.
We first tested the unit on an RC car without a cooling system. Then, we put the DJI O3 Air Unit on an O2 FPV drone to check for radio frequency interference.
Finally, we used a conventional FPV drone and swapped the camera for the DJI O3 Air Unit. From these tests, we found lots of great things about the system and a few areas where better performance was desired.
The first test we ran on the O3 unit was on a Traxxas Xmaxx RC truck. This involved a 3D-printed TPU mount on the top of the truck, allowing us to drive the truck from the truck’s point of view. Also, by enclosing the unit within the mounting solution, we could travel beyond-visual-line-of-sight (BVLOS) legally and test overheating on the unit.
Transmission quality was good in this configuration, allowing for clear video at a distance and through obstacles.
A drawback, however, was that without air being pushed over the unit from a drone, the transmission system would overheat after some time. Based on our testing, this overheating period took about 15–20 minutes.
Overheating frequency was minimal due to lower outdoor temperatures, generally in the 50s and 60s.
But in the summer, an air unit that gets too hot could make it hard to fly or even make it impossible to fly in very hot weather. To compensate for this, we added a fan to the mount, which allowed for more venting of the air unit to the outside of the mount. This venting and fan solved the problem for us, allowing us to run the unit continuously for over an hour.
Our second test was a torture test of the DJI transmission systems. This involved using an FPV drone with an O2 air unit and mounting the DJI O3 Air Unit onto the top near where an action cam would be mounted.
In our testing, O2 seemed to step on O3. Transmissions during test flights worked well until any obstacle was between the air unit and the goggles. Once that occurred, the O3 video froze, while the O2 video became pixelated but was still usable.
Additionally, we used the DJI O2 on channel 8 and the DJI O3 Air Unit on channel 1. Based on our testing, flying multiple drones at the same time may result in the O3 aircraft being blown out by the O2 aircraft, even when on completely different channels.
Finally, our last test was a more normal usage of the air unit. The unit was mounted onto a 5″ Johnny FPV frame with 1750KV motors on 6S.
The unit performed flawlessly in this configuration, save for the visible standoffs. To solve this, we 3D printed TPU camera mounts and extended the camera beyond the forward portion of the frame.
This eliminated our standoffs in view and most of the propellers; however, it leaves the camera incredibly vulnerable in the event of a crash or hard landing.
If you’re flying for fun, standoffs in view may not be the biggest deal; however, for others hoping to utilize the O3 Air Unit as a business drone, know that the ultra-wide field of view will likely result in props or standoffs in the shot.
The transmission, however, with the camera extended, is like nothing else in the FPV world. It’s incredibly clear, minimally latent, and looks like a final recording that you’re actively controlling.
It’s almost like a hyperrealistic simulator. Also, being able to record in 4K60 on the sensor means you don’t need an extra camera like a GoPro.
And to take it a step further, DJI incorporated RockSteady stabilization into the DJI O3 Air Unit, enabling fully stabilized footage directly off of the SD card and D-cinelike color modes.
The camera is also fully compatible with the DJI Avata’s ND filter set.
Overall, the air unit is an impressive addition to DJI’s line of drones and drone parts. The transmission quality is incredible, as is the recorded footage on the air unit’s SD card.
The primary area for improvement is the overheating of the air unit. In warmer climates, such as Phoenix, during the summer, it’s not impossible to think that the DJI O3 Air Unit won’t be usable due to the temperatures, whereas the DJI O2 still is.
This review of the DJI O3 Air Unit was written by Jason from the Pilot Institute, who tested the new DJI product in great detail!
Stay in touch!
If you’d like to stay up to date with all the latest drone News, scoops, rumors, and reviews follow us on Twitter, Facebook, YouTube, Instagram, or… Subscribe to our Daily Drone News email.*